01
9 – 16 m masts
Parking areas, fuel stations, small yards and toll plazas with 4–8 luminaires.
Product · Lighting Structures
High Mast Lighting Systems
Polygonal high mast structures from 9 m to 40 m with raise-and-lower headframes, engineered for highways, ports, airports, stadiums and large industrial yards.
ISO 9001 · Govt Approved
Tested & Certified to IS Standards
Overview
Engineered for extreme outdoor performance
Our high mast systems combine a continuously tapered polygonal pole, a galvanised lantern carriage and a self-locking winch to deliver uniform illumination over large open areas while keeping maintenance at ground level.
Every mast is designed to IS 875 (Part 3) wind loading and detailed for the specific luminaire configuration, wind zone and foundation conditions of your site.
Continuously tapered polygonal section-12, 16 or 20 sides
Internal or external raise-lower headframe with stainless winch
Hot-dip galvanised to IS 2629 / IS 4759, minimum 86 microns
Single or double door with lockable base compartment
Height range 9 m to 40 m (custom on request)
Base compartment Fabricated MS, single or double door, IP54
Material Structural steel plate IS 2062 E250 BR
Direct OEM Factory Supply
Turnkey Site Support Available
Product Range
Mast heights & headframe options
02
18 – 25 m masts
Highway interchanges, bus terminals and medium container yards with 8–16 luminaires.
03
30 – 40 m masts
Ports, airports, stadiums and steel plants with 12–24 high-output floods.
04
Fixed-top masts
Where headframe access is not required-welded top plate and side-entry bracket.
05
Raise-lower masts
Motorised or manual winch, lantern carriage, guide rollers and centring device.
06
Special / stadium masts
Tall lattice or tubular masts with tilt platforms and anti-glare optic housings.
Technical Drawings & Specs 
Technical Specifications
Built & tested to IS standards
Height range 9 m to 40 m (custom on request)
Base compartment Fabricated MS, single or double door, IP54
Material Structural steel plate IS 2062 E250 BR
Galvanising Hot-dip, 86–120 microns, IS 2629 / IS 4759
Winch Self-sustaining, 6–15 kN, stainless wire rope
Wind speed Designed for 33 – 55 m/s basic wind (IS 875 Pt.3)
Lantern carriage Galvanised, 4 – 24 luminaire positions
Accessories Junction box, MCB DBs, aviation light, lightning finial
Where it is used
Applications & engineering advantages
Target Deployment Sectors
Highways & interchangesSea & river portsAirports & apronsRailway yardsStadiumsSteel & cement plantsToll plazasBorder outposts
Ground-level maintenance
Raise-lower headframe brings all luminaires to the base door-no cherry pickers, no lane closures.
Corrosion warranty
Coastal and industrial corrosion grades with duplex paint systems and thicker galvanising.
Full design pack
Structural calculations, foundation drawings, GA drawings and lux dialux reports for approval.
Product Gallery
High Mast Lighting Systems in pictures
Lantern carriage-8-flood headframe
Continuously tapered polygonal mast
LED flood ring assembly
Highway high mast installation
Solar high mast variant
Round mast-12-flood headframe
FAQ
Frequently asked questions
Do you supply foundation bolts and templates?+
Yes. Each mast ships with a matched foundation bolt cage, template plate and installation manual. Foundation design is provided against your soil report.
What is the typical lead time?+
Standard masts up to 20 m ship in 3–4 weeks. Taller and stadium masts are 6–8 weeks depending on quantity and galvanising batch scheduling.
Can you commission on site?+
Yes, we depute erection supervisors and can provide full turnkey erection and illumination testing on request.